General specifications

Projector type

Three chip DLP

Light source lifetime

Up to 20,000

CLO (constant light output)

Yes

Optical dowser

Yes

Technology

3 x 0.90″ DMD™ with sealed core

Integrated web server

Yes

Resolution

3,840 x 2,160 (4K UHD)

Diagnostics

via Prospector web interface

Aspect ratio

1.78:1 (16:9)

Light source

Laser phosphor

Light output

Up to 12,500 ANSI Lumens Dimable to 4,000 lumens

Contrast ratio

20,000:1 (with DynaBlack enabled), 2,000:1 Sequential 600:1 ANSI

Brightness uniformity

>90%

Input resolutions

HDMI^TM:
Up to 4,096 x 2,160 @ 24/25/30/50/60Hz

DisplayPort (Single Input):
Up to 4,096 x 2,160 @ 24/30/50/60Hz

via Optional Quad DP1.2 Input Card

DisplayPort (Layout Mode: 2 x 2) *:
Up to 1,920 x 1,080 @ 120Hz
Up to 2,048 x 1,080 @ 120Hz

DisplayPort (Layout Mode: 4 x 1) *:
Up to 960 x 2,160 @ 120Hz

* Specialist GFX cards may be required

Lens range

(R9801661) – TLD+ (0.41:1) – 90 Degree Lens
(R9862001) – TLD+ (0.73 – 0.94:1) – 90 Degree Lens
(R9801414) – TLD+ (0.92 – 1.33:1)
(R9862005) – TLD+ (1.24 – 1.56:1)
(R9862010) – TLD+ (1.49 – 2.02:1) *
(R9862020) – TLD+ (2.01 – 2.76:1) *
(R9862030) – TLD+ (2.69 – 4.41:1) *
(R9862040) – TLD+ (4.37 – 7.35:1) *
(R9829997) – TLD+ (6.95 – 10.83:1)
* Standard Lens Option(s)

Latency

TBD

Optical lens shift

Up to 73% vertical lens shift & up to 28% horizontal lens shift (depending on lens selection)

Visit the Barco Residential Lens Calculator for further information
Download Lens & Airflow Data Here

Color correction

P7 RealColor™

Color gamut

Up to DCI (P3)

Image processing

Embedded Warp & Blend Engine

WARP

4-Corner Warp & Bow Correction via Warp Engine

Orientation

360° Rotation

Network connection

10/100 Ethernet via RJ45 connection

Operational humidity

0 to 80% (relative humidity)

HDR

HDR10

3D

Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details

Inputs

1 x HDMITM 2.0 (HDCP 2.2) 2 x HDBaseT (HDCP 1.4 – 9Gbps only) 1 x Display Port 1.2 Quad 3G / 12G SDI / BarcoLink 1 x RJ45 Ethernet 1 x RS232 1 x USB 2 x DMX (1 x Input / 1 x Output) 1 x XLR for Wired Remote 2 x 3D Sync (1 x Input / 1 x Output) Optional Upgrade: Quad DP1.2

Shipping Dimensions

Including Pallet – Excluding Lens (Packaged Separately)
850 x 665 x 613 mm
33.46 x 26.18 x 24.13 in.

Control

IR, RS232, IP, 12v Trigger
Driver modules available for: Crestron, Control4, RTI & Savant WiFi (Optional), XLR Wired Remote, GSM (Optional)

Shipping weight

TBD

Power requirements

110 – 130V / 200 – 240V / 50 – 60Hz

Standard accessories

Power Card / Remote control

Certifications

CE, FCC Class A and cCSAus

Power consumption

1,723 W Max

Noise level (typical at 25°C/77°F)

43 dB(A)

Operating temperature

0 to 40 °C at Sea Level
Optimal Set Point: 20 °C

*

Firmware upgradable
Please contact an authorized Barco representative for details

BTU per hour

Max. 5,876 BTU/h @ 200 – 240V
Max. 4,811 BTU/h @ 110 – 130V

Airflow requirements

Air Inlet (from Rear w/Feet Down): Front / Top / Right
Exhaust (from Rear w/Feet Down): Rear Clearance Requirements:
Front: 40cm
Left: 1cm
Right: 40cm
Rear: 40cm
Top: 40cm

Exhaust airflow

152 ft³/min @ 25 °C
258 m³/hour @ 25 °C Download Lens & Airflow Data Here

Dimensions (WxLxH)

Excluding Lens
540 x 725 x 355 mm
21.26 x 28.54 x 14 in.

Weight

Excluding Lens
48kg / 105bs

Warranty

Limited 3 years parts and labor
Extendable up to 5 years

Safety requirements

This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 2.3 is installed. Refer to the installation manual for further information.