Description
Theory Audio sb85 Soundbar
Description: | High Output Three-Channel Soundbar for 85″ TVs |
Operation: | Passive, Requires 3 Theory Loudspeaker Controller Amp Channels |
3 separate Ported Enclosures | |
DSP Requirements: | Requires Model-Specific Theory-Certified DSP Loudspeaker Processing |
Drivers: | 6 x 5″ Theory Carbon Fiber Low Frequency Drivers |
3 x 1.4″ Theory Advanced Polymer High Frequency Compression Drivers | |
Enclosure: | Powder Coated and Anodized Extruded and Machined Aluminum, Fabric Grille |
Terminals: | Twin Spring-Loaded Push Terminals |
Outdoor Capability: | Indoor Use Only |
Mounting Points: | Two Theory VersaSlotTM T-Slots Running Full Height with 4 x M5 Captive Nuts |
Optional Table Top Stand | |
Bandwidth | 54Hz -23kHz, -6dB; |
46Hz-24kHz, -10dB | |
Coverage: | 125 Degrees Conical |
160 Degrees Conical (-12dB @ 10kHz) | |
Sensitivity: | 94dB (LF); 108dB (HF) SPL/2.83V/1m |
Power Handling: | 200W (AES); |
400W (Continuous); | |
800W (Peak) | |
Minimum Recommended Power: | 50W rms |
Maximum Output: | 117dB SPL / 1m per Channel; |
>124dB Three Channels Driven | |
Nominal Impedance: | 4-ohms |
Colors: | Black |
Dimensions: | 9.5″ H x 75.2″ W x 3.8″ D (241mm H x 1910mm W x 97mm D) |
Total Installed Depth (Z-clip Mount): | 3.93″ D (100mm) Including Z-Clip Mounting Brackets |
Net Weight: | 72 lbs. (32.7kg) |
Included Accessories: | Theory Z-Clip Mounting Brackets (male and female) for Flat Surface Mounting |
Optional Accessories: | sb Table Top Stand Kit |
Reviews
There are no reviews yet.