AudioQuest Rocket 44 Single-BiAmp Speaker Cable Pair | The Grid HiFi

AudioQuest Rocket 44 Single-BiAmp Speaker Cable — Pair

Premium Rocket-series performance, purpose-built for bi-amplified loudspeaker systems.

AudioQuest Rocket 44 Single-BiAmp is designed for systems using separate amplifier channels to drive the high- and low-frequency sections of compatible loudspeakers. Its Single-BiAmp configuration provides four connections at both ends of each cable, creating a clean, integrated solution for passive bi-amplification.

Rocket 44 combines Solid Perfect-Surface Copper+ (PSC+) and Perfect-Surface Copper (PSC) conductors with Double Star-Quad Geometry, Carbon-Based Noise Dissipation, Foamed-Polyethylene insulation, and Direction-Controlled conductors. AudioQuest factory-terminates the cable with its upgraded SureGrip 500 connectors.

Designed for Bi-Amp Systems

Rocket 44 Single-BiAmp is specifically configured for systems where separate amplifier channels feed the high- and low-frequency sections of each loudspeaker.

Each cable provides:

Amplifier End: 4 connections
Speaker End: 4 connections

This allows the HF and LF sections of a compatible loudspeaker to receive independent amplifier feeds while maintaining a single, organized cable assembly for each speaker.

Solid Perfect-Surface Copper+ & Perfect-Surface Copper

One of Rocket 44's defining upgrades is its combination of Solid Perfect-Surface Copper+ (PSC+) and Perfect-Surface Copper (PSC) conductors.

AudioQuest's Perfect-Surface metals feature exceptionally smooth conductor surfaces, while its extremely high-purity PSC+ further minimizes distortion associated with grain boundaries within the copper.

Because Rocket 44 uses solid conductors, it also eliminates electrical strand-to-strand interaction—one of the distortion mechanisms found in conventional stranded speaker cables.

Double Star-Quad Geometry

Rocket 44 employs AudioQuest's Double Star-Quad Geometry.

Conductor geometry affects fundamental cable characteristics such as capacitance and inductance. AudioQuest uses its Star-Quad arrangement to reduce distortion compared with conventional parallel conductors and twisted-pair configurations.

Carbon-Based Noise Dissipation

Rocket 44 incorporates a Carbon-Based Noise-Dissipation System designed to reduce radio-frequency interference.

The negative conductors are covered with partially conductive Carbon-Loaded Polyethylene to reduce RF noise being fed back into the amplifier. An additional carbon layer helps damp interaction between positive and negative conductors, while an external Carbon-Based Noise-Dissipation layer further reduces outside interference.

The goal is a cleaner electrical environment with improved clarity and dimensionality.

Foamed-Polyethylene Insulation

Insulation surrounding a conductor can absorb energy and release some of it later as distortion.

Rocket 44 uses air-filled Foamed-Polyethylene insulation. Because air absorbs very little energy and polyethylene is inherently low-loss, this construction is designed to reduce dielectric-related distortion and preserve greater focus and clarity.

Direction-Controlled Conductors

Rocket 44's conductors are Direction-Controlled as part of AudioQuest's overall Noise-Dissipation technology.

AudioQuest controls conductor orientation so induced RF noise is dissipated and drained in the intended direction, helping minimize its effect on the audio signal.

SureGrip 500 Connectors

Rocket 44 Single-BiAmp is professionally terminated with AudioQuest's SureGrip 500 connectors.

Available configurations are:

• 4 Bananas → 4 Bananas — Silver
• 4 Multi-Spades → 4 Multi-Spades — Silver

AudioQuest notes that the ideal termination depends on the actual binding-post design of the amplifier and loudspeaker. Banana connectors may be preferable with certain isolated binding posts, while spades can provide a secure connection with other designs.

Available Lengths

At The Grid HiFi, Rocket 44 Single-BiAmp is sold exclusively as a stereo pair in:

• 8 ft / 2.4 m pair
• 10 ft / 3 m pair
• 12 ft / 3.6 m pair
• 15 ft / 4.6 m pair

Key Features

• Sold as a stereo pair
• Purpose-built Single-BiAmp configuration
• 4 amplifier-end connections per cable
• 4 speaker-end connections per cable
• Solid Perfect-Surface Copper+ (PSC+) and Perfect-Surface Copper (PSC)
• Double Star-Quad Geometry
• Carbon-Based Noise-Dissipation System
• Foamed-Polyethylene insulation
• Direction-Controlled conductors
• AudioQuest SureGrip 500 connectors
• Silver-plated Banana or Multi-Spade termination options
• Braided outer jacket

Why Step Up to Rocket 44 Single-BiAmp?

Rocket 44 takes a substantial step beyond Rocket 33 by upgrading the conductor blend from PSC/LGC to PSC+/PSC.

That means Rocket 44 retains the sophisticated solid-conductor construction, Double Star-Quad Geometry, Carbon-Based Noise Dissipation, and Foamed-Polyethylene insulation while moving to AudioQuest's substantially higher-purity copper and SureGrip 500 connectors.

For a revealing system already taking advantage of passive bi-amplification, Rocket 44 Single-BiAmp offers a serious cable solution without requiring two completely independent speaker cable runs.

Why Buy AudioQuest Rocket 44 Single-BiAmp from The Grid HiFi?

Bi-amplification makes proper cable configuration especially important. Amplifier architecture, speaker binding posts, cable length, and termination type all need to work together.

The Grid HiFi can help configure your Rocket 44 Single-BiAmp pair specifically for your amplifiers and loudspeakers, including selecting the correct length and Banana or Multi-Spade termination.

Contact The Grid HiFi for help selecting and configuring the right AudioQuest speaker cables for your system.