Description

Clarus 20 Amp High Current Power Cables are designed specifically to supply a 20A, 50/60Hz AC signal for the current demands of large power amplifiers without any loss of dynamics and provide maximum noise reduction. Noise rejection is critical and Clarus High Current 20A Power Cables rely on proprietary winding techniques and dual shielding to limit EMI egress and ingress thus ensuring the lowest noise floor. Since line and neutral alternate back and forth 60X per second, vibration isolation is critical. Clarus power cables uses a specialized dielectric formula developed specifically to dampen AC vibrational noise.

Current capabilities for high current power cables are a major concern. Large power amps draw current in pulses. Resistance in a power cable may restrict the peak level of a required pulse which will limit the transient response of an audio amplifier. Clarus High Current 20A Power Cables are designed with large size wire gauges specifically so as not to starve this current demand. However, large gauge conductors will not respond as quickly to transients. For this reason Clarus’ design includes a combination of smaller conductors and large conductors. The Clarus High Current 20A Power Cables provide full power, on-demand without limiting audio dynamics. For maximum noise reduction Clarus designed alternating lays and twisting of the cable’s conductors to reduce the distortion caused by magnetic fields that are created when insulated conductors are twisted in a bundle. Alternating the twist cancels out magnetic fields eliminating noise and distortion. Clarus Power cables are packaged and sold in each.