CORNER-HORN SPEAKER
The Klipschorn has truly stood the test of time. Its patented low-frequency horn boasts
a unique design which uses the floor and walls of the listening room to complete the
horn, increasing the low frequency extension and efficiency. The original corner-horn
loudspeaker’s folded low frequency enclosure offers the most efficient use of space
possible. Simply put, this is a basic design that cannot be improved according to the
laws of physics.
FULLY HORN-LOADED
The Klipschorn is the only fully horn-loaded loudspeaker available to the consumer
market which is designed to operate in a corner. With its three-way system, each
driver is coupled to an exponential horn and optimized to operate in its individual
pass-band. This allows the Klipschorn to be a staggering 10 to 20 times more efficient
than other conventional loudspeakers. Higher efficiency yields greater acoustic
power, which is generated with considerably less effort from the loudspeaker’s
diaphragm. The result is the cleanest, most dynamic sound possible throughout the
entire musical range.
BOOK-MATCHED WOOD VENEER
Klipsch only uses book-matched wood veneers for the Heritage series. The veneer
leaves are kept in order as they are delicately sliced from the timber and precisely
arranged to provide a mirror image at the splice joint — like turning the pages of a
book. This gives each speaker an aesthetically appealing and consistent appearance
that is treasured more than any other cut of wood veneer.
MATCHED PAIRS
Each pair of Heritage series loudspeakers is grain-matched, using wood veneer panels
that come from the same timber. Each cabinet is carefully matched so that each
speaker in the pair is practically indistinguishable from the other. The speakers move
seamlessly together through the factory, and each finished product is inspected and
labeled with sequential serial numbers, ensuring that your Heritage series speaker
leaves the factory as a meticulously crafted set.
BUILT TO LAST
While each and every component of the Klipschorn is built to last, Klipsch has always
recognized the unique and critical role of a loudspeaker’s cabinet in the sound
reproduction process. From the craftsmen in Hope, AR to the engineers in Indianapolis,
IN, Klipsch has always put an extraordinary emphasis on cabinet design. Crafted from
over a hundred wood panels, the Klipschorn enclosure is assembled using only the
highest-grade adhesives and fasteners. This is a speaker you will hand down from
generation to generation

SPECIFICATIONS
FREQUENCY RESPONSE (+/- 4 dB) 33Hz – 17kHz
SENSITIVITY1 105dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 100W/400W
MAXIMUM SPL 121dB Continuous
NOMINAL IMPEDANCE 8 ohms Compatible
CROSSOVER FREQUENCY HF: 4500Hz
MF: 450Hz
HIGH FREQUENCY DRIVER K-77-D 1” (2.54cm) Phenolic diaphragm
compression driver
MIDRANGE K-55-X 2” (5.08cm) Phenolic diaphragm
compression driver
LOW FREQUENCY DRIVER K-33-E 15” (38.1cm) Fiber-composite cone
woofer with a trihedral exponential
folded horn
ENCLOSURE MATERIAL Birch Plywood and MDF
INPUTS Dual binding posts / bi-wire / bi-amp
HEIGHT 50.75” (128.9.4cm)
WIDTH 31.25” (79.38cm)
DEPTH 28.25” (71.75cm)
WEIGHT 175lbs (79.5kg)
FINISH Walnut Cherry Black