AudioQuest Rocket 33 Single-BiWire Speaker Cable Pair | The Grid HiFi

AudioQuest Rocket 33 Single-BiWire Speaker Cable — Pair

Advanced Rocket-series technology, purpose-built for bi-wire loudspeakers.

AudioQuest Rocket 33 Single-BiWire brings several significant technologies together in a cable designed specifically for loudspeakers with separate high- and low-frequency binding posts. It combines Solid Perfect-Surface Copper (PSC) and Long-Grain Copper (LGC) conductors, Double Star-Quad Geometry, Carbon-Based Noise Dissipation, Foamed-Polyethylene insulation, and Direction-Controlled conductors.

The Single-BiWire configuration provides one clean cable run per speaker while independently connecting the loudspeaker's high- and low-frequency inputs.

Designed for Bi-Wire Loudspeakers

Rocket 33 Single-BiWire begins with a conventional two-connection amplifier end and separates into four connections at the loudspeaker:

Amplifier End: 2 connections
Speaker End: 4 connections

This allows the high- and low-frequency sections of a compatible loudspeaker to be connected independently while eliminating the need for the loudspeaker's factory jumper plates.

Solid Perfect-Surface Copper + Long-Grain Copper

Rocket 33 uses a carefully selected combination of Perfect-Surface Copper (PSC) and Long-Grain Copper (LGC).

AudioQuest's LGC contains fewer oxides, impurities, and grain boundaries than conventional copper, while the extremely smooth surface of PSC is designed to further reduce distortion and improve clarity.

Rocket 33 also uses solid conductors, eliminating the strand-to-strand interaction found in conventional stranded cable designs.

Double Star-Quad Geometry

Rocket 33 employs AudioQuest's Double Star-Quad Geometry.

The relationship between conductors directly affects a cable's capacitance, inductance, and overall behavior. AudioQuest developed its Star-Quad arrangement to reduce distortion compared with conventional parallel conductors and twisted-pair geometries while preserving dynamics and clarity.

Carbon-Based Noise Dissipation

Rocket 33 adds Carbon-Based Noise Dissipation to reduce the effects of radio-frequency interference.

The cable's negative conductors are covered with partially conductive Carbon-Loaded Polyethylene to reduce RF noise being fed back into the amplifier. An additional carbon layer helps damp interaction between positive and negative conductors, while an external Carbon-Based Noise-Dissipation System further reduces outside interference.

Foamed-Polyethylene Insulation

The material surrounding a conductor can absorb energy and release it later as distortion.

Rocket 33 uses air-filled Foamed-Polyethylene insulation around its conductors. Because air absorbs very little energy and polyethylene is inherently low-loss, this construction is designed to reduce dielectric-related distortion and maintain greater focus and clarity.

Direction-Controlled Conductors

All internal Rocket 33 conductors are Direction-Controlled as part of AudioQuest's Noise-Dissipation approach.

Controlling conductor orientation helps direct induced RF noise in the intended direction, minimizing its contribution to the audio signal.

SureGrip 300 Connectors

Rocket 33 Single-BiWire is professionally terminated with AudioQuest SureGrip 300 connectors.

Available termination configurations include:

• 2 Bananas → 4 Bananas — Gold
• 2 Bananas → 4 Bananas — Silver
• 2 Multi-Spades → 4 Multi-Spades — Gold
• 2 Multi-Spades → 4 Multi-Spades — Silver

AudioQuest notes that connector choice should take the actual amplifier and speaker binding-post designs into account.

Available Lengths

At The Grid HiFi, Rocket 33 Single-BiWire is sold exclusively as a stereo pair in:

• 8 ft / 2.4 m pair
• 10 ft / 3 m pair
• 12 ft / 3.6 m pair
• 15 ft / 4.6 m pair

Key Features

• Sold as a stereo pair
• Single-BiWire configuration
• 2 amplifier-end connections / 4 speaker-end connections
• Solid Perfect-Surface Copper (PSC) and Long-Grain Copper (LGC)
• Double Star-Quad Geometry
• Carbon-Based Noise-Dissipation System
• Foamed-Polyethylene insulation
• Direction-Controlled conductors
• AudioQuest SureGrip 300 connectors
• Gold- or silver-plated termination options
• Banana or Multi-Spade configurations
• Braided outer jacket

Why Step Up to Rocket 33 Single-BiWire?

Rocket 33 represents a substantial step beyond Rocket 11 and Rocket 22.

The move to solid PSC/LGC conductors, combined with Double Star-Quad Geometry, Carbon-Based Noise Dissipation, and Foamed-Polyethylene insulation, brings technologies typically associated with more ambitious AudioQuest cables into the Rocket range.

For a higher-resolution system with bi-wire-capable loudspeakers, Rocket 33 Single-BiWire offers an elegant way to connect both sections of the speaker without running two completely separate cable pairs.

Why Buy AudioQuest Rocket 33 Single-BiWire from The Grid HiFi?

Bi-wire cable configuration matters. The amplifier connection, loudspeaker binding posts, cable length, and termination type should all be considered before ordering.

The Grid HiFi can help configure your Rocket 33 Single-BiWire pair specifically for your amplifier and loudspeakers, including selecting the correct length and Banana or Multi-Spade terminations.

Contact The Grid HiFi for help building the right AudioQuest cable package for your system.