Description
The V 80 line level integrated amplifier is a completely new development, with the output stage based on the concept of the OCTAVE MRE 130 mono amplifier. His outstanding characteristic is an unbelievably melodic timbre and his unshakable performance. He reproduces any music with authority and natural elegance, instantly captivating the listener. Fundamental notes, warmth, three-dimensionality and speed, the V 80 plays music effortlessly and with pure joy.
Spezifications | |||||||||
Power Output | 2 x 75 W continuous, 80 W Peak into 4 Ohm | ||||||||
Frequency Response | 2 Hz – 80 kHz | ||||||||
Total Harmonic Distortion | < 0,1% @ 10 W into 4 Ohm | ||||||||
Signal-to-Noise Ratio | > 100 dB | ||||||||
Minimum Speaker Impedance | 2 Ohm | ||||||||
Connections | 1 x XLR, 6 x Cinch, (1 x Phono, 1 x Home Theatre pass-through) | ||||||||
Preamplifier | |||||||||
Input Sensitivity | 230 mV Cinch + XLR | ||||||||
Input Impedance | 40 kOhm Cinch; 25 kOhm XLR | ||||||||
Channel Balance | 0,5 dB bis – 70 dB from Volumeadjuster | ||||||||
Left/Right Crosstalk | 60 dB | ||||||||
Input to Input Crosstalk | – 105 dB | ||||||||
Gain Pre-Out | + 6 dB | ||||||||
Phono | |||||||||
Input Impedance | MC 500 Ohm, MM 47 kOhm | ||||||||
Signal-to-Noise Ratio | MC 75 dB, MM 90 dB | ||||||||
Input Sensitivity | MC 0.5 mV, MM 4 mV | ||||||||
Subsonic Filter | -12dB/ oct. 20Hz corner frequency | ||||||||
Features | ECO Mode, Bias Adjustment, Power Management | ||||||||
|
General Facts | ||||
Power Consumption | < 20 W Ecomode, 160 W idle, 400 W at full power | |||
Weight | 23 kg | |||
Standard Accessory | Power cord, 3 mm screwdriver, IR-Remote Control, Allen key for removing the cover, sparetube | |||
Main Fuse | 230/240 V Mains: 3,15 A slow-blow type H |